Author(s): | Maljaars, Johan; van Dooren, Frank; Kolstein, Henk |
Title: | Fatigue assessment for deck plates in orthotropic bridge decks |
Abstract: | Since the 1960s, orthotropic deck plates of highway bridges have been built with large cold-formed trapezoidal stiffeners supporting a deck plate with a thickness of approx. 12 mm. The maximum cross-beam spacing is approx. 4 m. A number of these bridge decks in The Netherlands suffer from fatigue cracks in the deck plate. First cracks have been observed after about 30 years in service. In one particular movable bridge, the cracks were found after only seven years. In many other countries, this type of crack has not yet been observed. This article provides a fatigue assessment procedure for deck plates. The procedure is calibrated with the conditions and observations in The Netherlands. It gives a fatigue life prediction and takes account of inspection results quantitatively. Although aspects such as the type and thickness of the surface finishes and the traffic load may vary between countries, the principles of the assessment procedure in this article are generally applicable and can be used to identify reasons for differences in fatigue life and to develop strategies for increasing the life. |
Source: | Steel Construction 5 (2012), No. 2 |
Page/s: | 93-100 |
Language of Publication: | English |
I would like to buy the article
You can download this article for 25 € as a PDF file (0.36 MB). The PDF file can be read, printed and saved. Duplication and forwarding to third parties is not allowed. |
I am an online subscriberAs an online subscriber of the journal "Steel Construction" you can access this article via Wiley Online Library. |
I would like to order "Steel Construction"This article has been published in the journal "Steel Construction". If you would like to learn more about the journal, you can order a free sample copy or find out more information on our website. |